Z-Wave ON/OFF Module TZ68E for Smart Home

Z-Wave ON/OFF Module TZ68E for smart home Voltage: 230V/50Hz Maximum Load: 2990W Range: Minimum 30m Frequency: 868.42MHz

TKBHOME Z-Wave Remote Control Socket for Smart Home/UK Plug: MODEL NO. TW68E

Technical Data:

Operating Voltage: 230V/50Hz

Maximum Load: 2990W

Range: Minimum 30m line of sight

Frequency Range(Europe): 868.42MHz

This plug-in ON/OFF Module in a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturers, and ours can also be used in other manufacturer's Z-Wave enabled network. Remote on/off control of the connected load is possible with other manufacturer's wireless controller. Each module is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.

INSTALLATION

1.Plug this ON/OFF Module into a wall outlet near the load to be controlled. 2.Plug the load in to the Module. Make sure the load to be controlled cannot exceed 2990/3500 watts.3.Turn the knob or switch on the load to the ON position.4.To manually turn ON the ON/OFF Module, press and release the ON/OFF knob. The blue indicator LED will turn ON , and the load plugged into the module will also turn ON.5.To manually turn OFF the Module, simply press and release the ON/OFF knob. The blue indicator LED will turn OFF and the load plugged into the Module will also turn OFF.

Z-Wave ON/OFF Module TZ68E for Smart Home