Z-Wave Remote wireless water sensor

1.Wireless behaviour: transmitter 2.Z-Wave type: slave 3.Distance: up to 30 m in buildings

This sensor monitors leakage and sends an alarm when flooding or leakage is detected. The sensing device can be away up to 3 m from the main device. The unit can be mounted on every flat surface. The installation can be done with screws or double-sided tape.The ST812 is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is recommended.

 

Technical Data:

Wireless behaviour: transmitterZ-Wave type: slaveDistance: up to 30 m in buildingsDisplay: -Local interaction: one button for network operationsPower    supply: 3 * AA  batteriesDimensions: 85x85x41 mm (HxWxD)Weight: 185 gr.

Z-Wave Remote wireless water sensor