TKBHOME Z Wave wireless on/off Switch

1.Wirelessly control on/off functions of overhead lighting 2.Controllable Z-Wave Groups:4 Radio Frequency Controlled Z-Wave Dual paddle Wall Switch TZ66D with 868.42MHzMODEL NO. TZ66D  

The TKB Z-Wave dual wall switch is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocolIt is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device.

 Features:

wirelessly control on/off functions of overhead lighting

provides Z-Wave wireless and manual control

LED indicator light allows easy loaction of switch in dark room

Requires in-wall installation with hard-wired connections

Easily connects using existing wires

Controllable Z-Wave Groups:4

USE:

Tipping one time or two times the switching paddle performs the control.

The left paddle controls the local load while the right paddle remotely controls Z-Wave associated devices only.

The association of further Z-Wave devices needs to be done by a Z-Wave controller.

The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation.

The unit is shipped completely with electronics, switching paddle and mounting frame in white style. It is designed for use within a 3-wire system, which means that a neutral wire is needed for operations.

The group1 and group2  on the TZ66D allows dimming and brightening of Z-Wave dimmers if associated.

SPEC.

Power: 230 VAC, 50 Hz

Signal (Frequency): 868.42 MHz

Maximum Load – Resistive: 6 amps (1380 watts) maximum, 230 VAC

Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest   Z-Wave Receiver Module.

TKBHOME Z Wave wireless on/off Switch